Power Supply
Linear 24vdc 2-3 AMP
Cabling
Shielded twisted 6 (18-22 Gauge) for communication wiring.
A separate twisted pair (14-18 Gauge) for the power supply.
Tools
- 1 Phillips screwdriver to open and access the reader
- 1 small flathead screwdriver for landing the wiring
- Wire Strippers
Wiring and Power 
Grounding
Continuity is created by landing a jumper between the 12v ground powering the access control panel to the 24v ground powering the reader.
Plug and Play
Out of box the reader is set to output Standard Wiegand Communication and is set to Max Read range and Antenna Power.
Read Lobe Example
Tag Enrollment
|
For Stock Tags, you will find the Facility Code under the description. UHF W26 FC:020. The tag # is printed on the box and tag as well. For Special Programmed tags, this information is submitted by the customer. You will be able to go in and enroll your tags with the information provided above. |
Credential OrientationCards can be badged either horizontally or vertically on a lanyard or belt clip. |
|
The way it worksFor optimal performance, readers should be mounted on the same side to stay consistent with the badging. A line of sight is needed in order to create accurate reads. The uPASS Access offers convenient secure door access. However, it’s not a good solution for mustering or people tracking due to the fact that reads can be blocked. |
|
Handicap Access
The uPASS product line is a great solution for handicap entries. Because of the longer read range, it allows for easy convenient access. A variety of tags are available for handicap or wheelchair access when needed.